CE Smith Front Hanger for 1-3/4" Wide Slipper Springs - 1-1/4" Tall - 9/16" Bolt Hole

Video Transcript for Review of CE Smith Trailer Leaf Spring Suspension - Front Hanger - CES55FR

Hi, everybody. Andy here with etrailer.com. Let's take a real quick look at this CE Smith Front Hanger. This heavy duty front hanger is going to connect the eye of a slipper spring to your trailer. And this is made here in the USA, and it is a weld-on installation. And this is going to work with a nine 16ths of an inch in diameter shackle bolt.

And of course, those bolts are sold separately. And let me retrieve my ruler here and just go over some measurements with you that'll prove helpful. Looking at the thickness of this hangar, as you can see, we're sitting right at a quarter of an inch thick. And then some overall dimensions. The overall height, we're sitting right at two inches tall.

And then the overall depth, we're sitting right at an inch and a half. And the inner width, try to line that up here for you. We're sitting right at one and seven eights inches. And then the height from the center of our bolt hole to the top of the hangar. Let's see if we can line that up here.

We're sitting right at an inch and a quarter, again, from the center of that bolt hole to the top of the hangar. Well, that's gonna wrap up our brief look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.

.